UNION AI

Job Responsibilities

1、Participate in quality planning and, based on product characteristics, plan the quality assurance system for the production process, establish quality KPI targets, ensure shipment quality, and improve customer satisfaction.

2、Handle production line quality issues, collect and analyze quality data, identify potential quality risks, organize root cause analysis, develop corrective and preventive actions, and follow through until full closure is achieved.

3、Drive continuous product quality improvement and increase first-pass yield; work with technical teams to develop improvement plans and track implementation. Follow up on after-sales and customer quality issues, conduct root cause analysis, and ensure issue closure.

4、Lead the handling, root cause analysis, and resolution of market quality issues related to production, and track and verify improvement results through to closure.

5、Organize process audits, support on-site customer audits, and drive corrective actions for audit findings until closure.

6、Support the development of quality platforms and systems, optimize internal quality processes, and establish related processes and rules with relevant stakeholders.

Job Requirements

1、Bachelor’s degree or above in an engineering or science-related discipline, with at least 5 years of experience in quality management. Experience in production quality and new project quality is preferred; experience with industrial control products or robotics products is a plus.

2、Familiar with quality management systems and able to organize and respond to second-party and third-party audits.

3、Proficient in applying a variety of quality tools for problem analysis and improvement, especially 8D, PPAP, MSA, FMEA, the 7 QC Tools, and SPC.

4、Strong internal and external communication and coordination skills, with the ability to independently lead cross-functional work.

Job Responsibilities

1、Be responsible for full project lifecycle management, including initiation, planning, execution, monitoring, and closure.

2、Develop project plans and define project scope, schedule, and cost baselines.

3、Monitor the entire project lifecycle, including project schedule management, resource management, risk management, and change management.

4、Organize reviews of deliverables and documents for key project checkpoints, stage gates, and milestones, and drive their completion, submission, and archiving.

5、Establish and maintain standardized project initiation mechanisms, project prioritization systems, and risk classification frameworks.

6、Establish and optimize the R&D project development process system, and support its implementation and communication across teams.

7、Assist R&D project leaders with cross-functional communication, including internal coordination with procurement, supply chain, and marketing teams, as well as external communication with customers and suppliers.

8、Coordinate project resources and drive execution to ensure successful project delivery.

9、Summarize and review project management experience to support continuous improvement.

Job Requirements

1、Experience in project management; PMP certification is preferred.

2、Familiar with project management processes and methodologies, with the ability to independently manage projects.

3、Proficient in the use of project management tools.

Job Responsibilities

1、Lead software development for assigned projects.

2、Be responsible for the development of software products for motor drive control algorithms; experience in permanent magnet synchronous motor (PMSM) development is preferred.

3、Participate in product requirements analysis and prepare software requirement specifications.

4、Prepare high-level software design specifications and organize design reviews with project team members and software-related colleagues.

5、Support system integration, software performance tuning, algorithm validation, and on-site commissioning.

Job Requirements

1、Bachelor’s degree or above in Power Electronics, Motor Control, Automatic Control, or a related field.

2、At least 5 years of R&D experience in inverter projects.

3、Proven ability to independently carry out project software development and complete software development tasks independently.

4、Strong teamwork skills, with a strong sense of goals and responsibility.

Job Responsibilities

1、Lead the R&D and design of hardware platforms for robotics domain controllers, including system architecture for power management, signal interfaces, communication buses, and peripheral I/O.

2、Based on AI computing platforms such as NVIDIA Jetson (Orin/Xavier/Nano), complete schematic design, PCB layout review, and full system integration.

3、Collaborate with AI algorithm, software, and driver teams to define hardware interfaces, perform system integration and debugging, and complete whole-machine testing.

4、Participate in electrical safety, EMC, and reliability design, as well as certification testing for controllers.

5、Support manufacturing activities by preparing BOMs, test specifications, and production process documentation.

6、Track the latest developments in AI edge computing chips and industrial control technologies, and support pre-research for next-generation control platforms.

Job Requirements

1、Bachelor’s degree or above in Electronics, Automation, Computer Engineering, Mechatronics, or a related field.

2、At least 3 years of experience in embedded hardware or industrial control equipment development; experience in robotics, automation equipment, or power control systems is preferred.

3、Familiar with the hardware architecture and peripheral circuit design of the NVIDIA Jetson series (Orin/Xavier/TX2); experience with AI controllers or edge computing products is preferred.

4、Familiar with the design of communication interfaces such as CAN, RS485, EtherCAT, Ethernet, SPI, and I2C.

5、Familiar with power module design (DC/DC converters, isolated power supplies), signal integrity, thermal design, and EMC design.

6、Experience in the development or maintenance of PLCs, industrial PCs, or motion control cards is preferred.

7、Proficient in EDA tools such as Altium Designer, Cadence, or Mentor.

8、Strong ability to read English technical documentation, communicate across departments, and drive project execution.

9、Strong interest in AI and embodied intelligence technologies, with a continuous learning mindset and innovative thinking.

Job Responsibilities

1、Design hardware circuits and schematics for products such as inverters and power supplies.

2、Perform component selection, simulation, and calculations, and complete PCB design, debugging, and validation.

3、Be responsible for hardware functional testing, failure analysis, and the development of corrective solutions.

4、Participate in design reviews and technical discussions, and propose optimization plans.

Job Requirements

1、Bachelor’s degree or above in Power Electronics, Electronic Engineering, or a related field, with at least 1 year of hardware development experience.

2、Familiar with components such as IGBTs, MOSFETs, SiC devices, inductors, and capacitors.

3、Proficient in common circuit topologies used in power electronics, with a solid understanding of underlying principles and familiarity with relevant simulation tools.

4、Strong sense of work standardization, with good documentation skills in preparing specifications, calculation reports, and test reports.

5、Proficient in using common EDA software, such as Altium Designer, for schematic design and PCB layout.

6、Familiar with hardware debugging and testing, and able to independently solve common technical issues.

7、Strong communication skills and a good team-oriented mindset.

8、At least 1 year of experience in the inverter or power supply industry.

Job Responsibilities

1、Be responsible for the design and development of domain controller software for humanoid robots.

2、Participate in the software architecture design of the Domain Control Unit (DCU) and optimize real-time control performance.

3、Develop control algorithms, such as PID, MPC, and state machines, and integrate them into embedded systems.

4、Implement in-vehicle and industrial communication protocols, including CAN, Ethernet, LIN, and FlexRay.

5、Conduct system testing, fault diagnosis, and performance optimization to ensure real-time capability and system stability.

6、Collaborate with hardware, algorithm, and testing teams to complete system integration and validation.

Job Requirements

1、Bachelor’s degree or above in Control Science and Engineering, Robotics Engineering, Computer Science, Automation, Electronic Engineering, or a related field.

2、Proficient in C/C++ and familiar with embedded development environments such as RTOS and Linux/QNX.

3、Familiar with CANoe, CANalyzer, and Ethernet protocol stacks such as DoIP and SOME/IP.

4、Familiar with MATLAB/Simulink, AUTOSAR (Classic/Adaptive), and the Vector toolchain.

5、Experience in robot vision control or the development of main control systems such as industrial PCs, VCUs, or PLCs is preferred.

6、At least 3 years of experience in automation control or robotics software development is preferred.

Job Responsibilities

1、Participate in product requirements reviews and be responsible for software architecture design and module partitioning related to power management, using C for embedded software development.

2、Develop and implement core power control algorithms, such as PFC, LLC, and phase-shifted full-bridge control.

3、Develop low-level drivers for ADC, PWM, Timer, I2C, SPI, UART, CAN, and other peripherals.

4、Implement communication protocols with host systems or BMSs, such as PMBus, CAN 2.0B, Modbus, and SMBus.

5、Develop customized proprietary communication protocols.

6、Implement system state machines, fault protection mechanisms, and thermal management strategies.

7、Be responsible for power management, power consumption optimization, bootloader development, and firmware upgrade functions.

8、Write unit test and integration test cases, and perform hardware-in-the-loop testing using tools such as oscilloscopes, power supplies, and electronic loads.

9、Collaborate with hardware engineers on system integration and debugging, and resolve hardware-software issues.

10、Support the identification and resolution of software-related issues during EMC and safety compliance testing.
11、Prepare design documents, code comments, test reports, and technical manuals.

Job Requirements

1、Bachelor’s degree or above in Power Electronics, Electrical Engineering, Automation, Electronic Information, Computer Science, or a related field.

2、At least 3 years of experience in embedded software development for power products or related fields.

3、Proficient in C, with strong coding style and code standardization awareness.

4、Solid hardware fundamentals, with the ability to read schematics and PCB layouts, and proficiency in using oscilloscopes, logic analyzers, and other debugging tools.

5、Familiar with at least one mainstream MCU or DSP platform, such as TI C2000, STM32, or NXP series, and knowledgeable about their peripherals.

6、Understanding of the basic theories of digital power control, such as PID control and loop compensation.

7、Strong problem analysis skills and enthusiasm for solving complex technical issues.

8、Strong sense of responsibility and teamwork spirit.

9、Excellent communication skills, with the ability to collaborate efficiently with hardware, testing, and product teams.

Job Responsibilities

1、Be responsible for the sales of AI computing center solutions, GPU servers, power systems, and related products and solutions.

2、Engage with AI companies, research institutes, data centers, and government projects to develop business opportunities.

3、Understand customers’ computing capacity needs and return-on-investment logic, and design appropriate business cooperation models.

4、Drive the implementation of the company’s computing capacity leasing, hosting, and distributed computing network businesses.

5、Analyze market trends and provide recommendations for the company’s investment decisions and product planning.

Job Requirements

1、Bachelor’s degree or above in Computer Science, Electronic Information, Artificial Intelligence, or a related field.

2、Familiar with GPU computing, servers, power systems, or IDC-related business.

3、Existing customer resources in AI infrastructure or data center sectors are preferred.

4、Strong logical thinking, with solid skills in ROI analysis and business model design.

5、Able to work bilingually in Chinese and English, and participate in international market cooperation.